UK

Sales & Product Support

If you wish to contact Warwick Music Limited, the manufacturer of pBone, pBone mini, pTrumpet, pCornet, pBuzz and our plastic mouthpieces:

UK: 024 7671 2081

USA Representative Rich Breske: (574) 968-6850

pBone Care CardpTrumpet Care CardpBuzz Care Card

Education enquiries

We actively support music education here at Warwick Music, please contact us

UK: 024 7671 2081

USA: +1 (574) 968-6850

Distributors

pBone, pBone mini, pTrumpet, pCornet, pBuzz and our plastic mouthpieces are available for trade dealers to buy from these official distributors

John Hornby Skewes
Tel: +44 (0) 113 286 5381
sales@jhs.co.uk
www.jhs.co.uk

GEWA Musik GmbH
Tel: +49 37423 7780
info@gewamusic.com
www.gewamusic.com

All pInstruments

St Louis Music
Tel: 314-727-4512
info@stlouismusic.com
www.stlouismusic.com/brand/pinstruments/

pBuzz Products only

Rhythm Band Instruments
www.rhythmband.com
800-424-4724 (817-335-2561)

For School Sales, contact Schoolsales@rhythmband.com

For U.S. dealer inquiries:
East: Eastsales@rhythmband.com
Sales – Wendy Davy – x120
CSR – Cat McKay – x121
West: Westsales@rhythmband.com
Sales – Ashley Walsh – x119
CSR – Jamiesha Horne – x123

Taylormade Music Australia
Tel: +61 (0) 414 406604
info@taylormademusic.net
www.taylormademusic.net

Australia

Sales

Howard Taylor & Martin Luck, Taylormade Music Australia

+61 (0) 414 406604

www.taylormademusic.net

Distributors

pBone, pBone mini, pTrumpet, pCornet, pBuzz and our plastic mouthpieces are available for trade dealers to buy from these official distributors

China

Sales

Chris Shea

+86 177 0371 6094

http://shop.pbone.co.uk

Distributors

pBone, pBone mini, pTrumpet, pCornet, pBuzz and our plastic mouthpieces are available for trade dealers to buy from these official distributors

Malaysia

Sales

Please call our UK team +44 (0)24 7671 2081

http://shop.pbone.co.uk

Distributors

pBone, pBone mini, pTrumpet, pCornet, pBuzz and our plastic mouthpieces are available for trade dealers to buy from these official distributors

USA

Sales

USA Representative Rich Breske
Warwick Music, Inc.
PO Box 71
Osceola, IN 46561

(574) 968-6850

Distributors/United States:

All pInstruments

St Louis Music
Tel: 314-727-4512
info@stlouismusic.com
www.stlouismusic.com

pBuzz Products only

Rhythm Band Instruments
www.rhythmband.com
800-424-4724 (817-335-2561)

For School Sales, contact Schoolsales@rhythmband.com

For U.S. dealer inquiries:
East: Eastsales@rhythmband.com
Sales – Wendy Davy – x120
CSR – Cat McKay – x121
West: Westsales@rhythmband.com
Sales – Ashley Walsh – x119
CSR – Jamiesha Horne – x123

Distributors

pBone, pBone mini, pTrumpet, pCornet, pBuzz and our plastic mouthpieces are available for trade dealers to buy from these official distributors

Product Questions

Maintenance Videos

Here's some videos that might help.

pBuzz - how to install your paper insert
pTrumpet - how to install the training caps
pTrumpet & pCornet - how to grease the tuning slides
pTrumpet & pCornet - how to solve your sticky valves
pBone & pBone Mini - how to assemble
pBone & pBone Mini - how to grease your tuning slides
pBone & pBone Mini - how to clean your slide

FAQs

If you find the valves are sticking we recommend the following:

  1. Remove each piston and clean and dry the piston and inside of the valve casing with a lint free cloth. If you have used oil previously, remove all oil thoroughly from the piston and inside of the valve casing.
  2. In the early stages of use, some wear of the piston surface is normal and extra cleaning may be needed as the valve system beds in.
  3. Ensure there is no obstruction or plastic residue inside the valve casing itself, especially around the ports. You can run your fingertips inside the valve casing to feel for any rough edges.
  4. When playing pTrumpet, hold the valve block with a relaxed left hand as excessive tension in the hand-grip may cause compression of the valve casing and sticking of the valves.

The valve system is low maintenance – designed to operate without any oil or lubrication. However, regular valve oil can be used sparingly and applied thinly across each piston. You may find the application of valve oil or water does not improve valve performance, in which case, clean and dry each piston and the inside of the valve casing thoroughly with a lint free cloth.

pTrumpet comes with 3 training caps to help position small fingers correctly.

pTrumpet is completely made from plastic, making it very durable and robust. It is also coated with antimicrobial technology BioCote – an agent that kills microorganisms and inhibits their growth. To clean the external surfaces, use a soft cloth with warm soapy water and dry the instrument with a lint free cloth. We recommend that you clean the instrument before first use, being careful not to get soapy water into the valve system.

Read more about BioCote

Apply a small amount of slide cream to the stockings or apply oil/liquid slide lube to the inner slide top, allowing the oil/lube to run down to the stockings. Spray inner slides with water and work up and down to distribute the cream/oil/lube. Just be careful to only use a small amount as otherwise it will clog up and just make the slide slower. A lot of pBoners simply use water to lubricate the slide and that works great on its own!

When new the slide may feel slow and scratchy. The slide will “run-in” with use as the brass stockings polish themselves and at the same time smooth down the interior of the outer slides. During this “running-in period” you will need to clean the inner slides frequently with a lint free cloth or baby-wipe. You should expect to find a dark deposit both on your cloth and in the condensation coming from the water key, this is normal and shows that the stockings are doing their job smoothing down the interior of the outer slide tubes.

With use and over time this process will diminish and disappear as the slide becomes quicker, quieter and smoother to run. You may find that the slide needs less lube during the “running in” period. If during this period, the slide slows it will almost certainly be a build-up of the dark deposit so always give the slide a good clean should it slow down.

To maintain your instrument’s finish, never clean with hot water, chemical agents or harsh detergents or solvents. Use only lukewarm water for cleaning purposes. The coloured parts can be cleaned with a soft cloth. The glass fibre outer slides may be cleaned with warm soapy water and then lightly dressed with vegetable oil to restore the look of the surface.

You should expect to find a dark deposit both on your cloth and in the condensation coming from the water key, this is normal and shows that the stockings are doing their job smoothing down the interior of the outer slide tubes. With use and over time this process will diminish and disappear as the slide becomes quicker, quieter and smoother to run.

To correctly assemble the pBone, a 5-8mm gap should be left at the black joint.

To clean the external red surfaces, use a soft cloth with warm soapy water and dry the instrument with a lint free cloth. We recommend that you clean the instrument before first use, being careful not to get soapy water on the clear tube as this may damage the coloured paper insert. We do not recommend placing or immersing the pBuzz fully in water as this can damage the coloured-paper insert sleeve inside the clear plastic tube.

  1. Remove the mouthpiece
  2. Remove the black rubber washer – be careful not to let the middle pipe fall on the floor as you remove the washer
  3. Carefully push the middle pipe through the bottom of the bell – you will now have 2 separate sections.
  4. You can gentle click upwards the top of the clear plastic cover to reveal the paper insert
    To re-assemble pBuzz reverse steps 4 through 1

You can clean the pInstrument mouthpieces fully in warm soapy water and even put them in the dishwasher!

Couldn't find the answer?

Then why not get in touch

Product Support Get in Touch

Apply a small amount of slide cream to the stockings or apply oil/liquid slide lube to the inner slide top, allowing the oil/lube to run down to the stockings. Spray inner slides with water and work up and down to distribute the cream/oil/lube. Just be careful to only use a small amount as otherwise it will clog up and just make the slide slower. A lot of pBoners simply use water to lubricate the slide and that works great on its own!

When new the slide may feel slow and scratchy. The slide will “run-in” with use as the brass stockings polish themselves and at the same time smooth down the interior of the outer slides. During this “running-in period” you will need to clean the inner slides frequently with a lint free cloth or baby-wipe. You should expect to find a dark deposit both on your cloth and in the condensation coming from the water key, this is normal and shows that the stockings are doing their job smoothing down the interior of the outer slide tubes.

With use and over time this process will diminish and disappear as the slide becomes quicker, quieter and smoother to run. You may find that the slide needs less lube during the “running in” period. If during this period, the slide slows it will almost certainly be a build-up of the dark deposit so always give the slide a good clean should it slow down.

To maintain your instrument’s finish, never clean with hot water, chemical agents or harsh detergents or solvents. Use only lukewarm water for cleaning purposes. The coloured parts can be cleaned with a soft cloth. The glass fibre outer slides may be cleaned with warm soapy water and then lightly dressed with vegetable oil to restore the look of the surface.

You should expect to find a dark deposit both on your cloth and in the condensation coming from the water key, this is normal and shows that the stockings are doing their job smoothing down the interior of the outer slide tubes. With use and over time this process will diminish and disappear as the slide becomes quicker, quieter and smoother to run.

To correctly assemble the pBone, a 5-8mm gap should be left at the black joint.

You can clean the pInstrument mouthpieces fully in warm soapy water and even put them in the dishwasher!

Apply a small amount of slide cream to the stockings or apply oil/liquid slide lube to the inner slide top, allowing the oil/lube to run down to the stockings. Spray inner slides with water and work up and down to distribute the cream/oil/lube. Just be careful to only use a small amount as otherwise it will clog up and just make the slide slower. A lot of pBoners simply use water to lubricate the slide and that works great on its own!

When new the slide may feel slow and scratchy. The slide will “run-in” with use as the brass stockings polish themselves and at the same time smooth down the interior of the outer slides. During this “running-in period” you will need to clean the inner slides frequently with a lint free cloth or baby-wipe. You should expect to find a dark deposit both on your cloth and in the condensation coming from the water key, this is normal and shows that the stockings are doing their job smoothing down the interior of the outer slide tubes.

With use and over time this process will diminish and disappear as the slide becomes quicker, quieter and smoother to run. You may find that the slide needs less lube during the “running in” period. If during this period, the slide slows it will almost certainly be a build-up of the dark deposit so always give the slide a good clean should it slow down.

To maintain your instrument’s finish, never clean with hot water, chemical agents or harsh detergents or solvents. Use only lukewarm water for cleaning purposes. The coloured parts can be cleaned with a soft cloth. The glass fibre outer slides may be cleaned with warm soapy water and then lightly dressed with vegetable oil to restore the look of the surface.

You should expect to find a dark deposit both on your cloth and in the condensation coming from the water key, this is normal and shows that the stockings are doing their job smoothing down the interior of the outer slide tubes. With use and over time this process will diminish and disappear as the slide becomes quicker, quieter and smoother to run.

To correctly assemble the pBone, a 5-8mm gap should be left at the black joint.

You can clean the pInstrument mouthpieces fully in warm soapy water and even put them in the dishwasher!

To clean the external red surfaces, use a soft cloth with warm soapy water and dry the instrument with a lint free cloth. We recommend that you clean the instrument before first use, being careful not to get soapy water on the clear tube as this may damage the coloured paper insert. We do not recommend placing or immersing the pBuzz fully in water as this can damage the coloured-paper insert sleeve inside the clear plastic tube.

  1. Remove the mouthpiece
  2. Remove the black rubber washer – be careful not to let the middle pipe fall on the floor as you remove the washer
  3. Carefully push the middle pipe through the bottom of the bell – you will now have 2 separate sections.
  4. You can gentle click upwards the top of the clear plastic cover to reveal the paper insert
    To re-assemble pBuzz reverse steps 4 through 1

You can clean the pInstrument mouthpieces fully in warm soapy water and even put them in the dishwasher!

If you find the valves are sticking we recommend the following:

  1. Remove each piston and clean and dry the piston and inside of the valve casing with a lint free cloth. If you have used oil previously, remove all oil thoroughly from the piston and inside of the valve casing.
  2. In the early stages of use, some wear of the piston surface is normal and extra cleaning may be needed as the valve system beds in.
  3. Ensure there is no obstruction or plastic residue inside the valve casing itself, especially around the ports. You can run your fingertips inside the valve casing to feel for any rough edges.
  4. When playing pTrumpet, hold the valve block with a relaxed left hand as excessive tension in the hand-grip may cause compression of the valve casing and sticking of the valves.

The valve system is low maintenance – designed to operate without any oil or lubrication. However, regular valve oil can be used sparingly and applied thinly across each piston. You may find the application of valve oil or water does not improve valve performance, in which case, clean and dry each piston and the inside of the valve casing thoroughly with a lint free cloth.

pTrumpet comes with 3 training caps to help position small fingers correctly.

pTrumpet is completely made from plastic, making it very durable and robust. It is also coated with antimicrobial technology BioCote – an agent that kills microorganisms and inhibits their growth. To clean the external surfaces, use a soft cloth with warm soapy water and dry the instrument with a lint free cloth. We recommend that you clean the instrument before first use, being careful not to get soapy water into the valve system.

Read more about BioCote

You can clean the pInstrument mouthpieces fully in warm soapy water and even put them in the dishwasher!